Publicidad
Idiomas disponibles
Idiomas disponibles
when the product is not in use, is
transported or is in storage.
•
Always wear heavy-duty gloves when
repairing the cutting attachment. The
cutting equipment is extremely sharp and
can easily cause cuts.
•
Store the product out of reach of children.
•
Use only original spare parts for repairs.
•
Never use a product that is faulty.
Carry out the safety checks, maintenance
and service instructions described in this
manual. Some maintenance and service
measures must be carried out by trained
and qualified specialists.
•
Secure the machine during transport.
Safety instructions for the cutting
equipment
WARNING:
instructions that follow before you
use the product.
•
Only use approved guide bar/saw chain
combinations and filing equipment. Refer
Maintenance on page 12 for
to
instructions.
•
Use protective gloves when you use or
do maintenance on the saw chain. A saw
chain that does not move can also cause
injuries.
•
Keep the cutting teeth correctly sharpened.
Obey the instructions and use the
recommended file gauge. A saw chain
that is damaged or incorrectly sharpened
increases the risk of accidents.
•
Keep the correct depth gauge setting.
Obey the instructions and use the
Introduction
WARNING:
understand the safety chapter
before you assemble the product.
2106 - 001 - 07.08.2023
Read the warning
Assembly
Read and
recommended depth gauge setting. Too
large depth gauge setting increases the
risk of kickback.
•
Make sure that the saw chain has the
correct tension. If the saw chain is not
tight against the guide bar, the saw chain
can derail. An incorrect saw chain tension
increases wear on the guide bar, saw
chain and chain drive sprocket. Refer to
tension the chain on page 15 .
•
Do maintenance on the cutting equipment
regularly and keep it correctly lubricated. If
the saw chain is not correctly lubricated,
the risk of wear on the guide bar, saw
chain and chain drive sprocket increases.
SAVE THESE
INSTRUCTIONS
To
7
Publicidad
