Publicidad
Idiomas disponibles
Idiomas disponibles
Multifunction blade
The multifunction blade is mainly used for chopping food.
CAUTION
Risk of injury! Take extra care when handling this accessory as the
blades are very sharp and can cause injury if mishandled.
To install the multifunction blade, do the following:
1
Place the blender jar in the correct orientation onto the unit base and secure.
2
Grasp the top of the blade post. DO NOT grasp or touch the sharp edges of
the blade.
3
Lower the multifunction blade over the drive coupler in the bottom of the
container, making sure the tabs on the drive coupler line up with the slots in
the bottom of the blade. Then press down fi rmly and turn anti-clockwise until
it clicks into place.
Note: The blender jar must be properly seated on the base of the unit or the
blade will not install.
EN
59
Publicidad
