IPC Kosmic-H PW-H31 Manual De Instrucciones página 24

TRANSPORTING
To move the machine, dis-
connect it from the mains
electricity and water supplies,
release the parking brake on
the side of the machine and
COMMAND AND CONTROL DEVICES
!
Warning
Before connecting the machine to the water supply and to the
power mains, it is essential to know the function of the cleaner's
SAFETY DEVICES
must not be tampered with or used for other than their desig-
protects the high pressure hydraulic circuit in
the event of a by-pass valve malfunction or if the hydraulic
Operations involving the safe-
ty valve must be performed
by a technical service centre
Prevents the trig-
ger on the handgrip from
stops the
high pressure washer if the
WATER CIRCUIT
CONNECTION
Connect the feed hose to
the hosetail on the cleaner
Check that the pressure and
quantity of the water supplied
the cleaner to work properly:
200 to 800 kPa (29 to 116
Maximum temperature of
Connect the high pressure
English
C C
B B
A A
!
Danger
!
Danger
Never suck up liquids containing solvents or acids in the
Information
Respect the instructions provided by the water
Current regulations specify that the appliance may
not be connected to the drinking water supply unless a suitable
Water passing through a system separator is no longer clas-
!
Warning
ELECTRICAL CONNECTION
The water cleaner must be connected to a mains electricity
Ensure that the mains voltage available is the same as the volt-
age at which the cleaner is supposed to work; this is indicated
!
Danger
- The use of any electric appliance requires the respect of
some basic rules:
• Do not use the appliance bare-footed or with unsuitable
• Do not pull the supply cable or the appliance itself in order
belongs to CLASS I
22
-