FAULTS
When the switch is turned the cleaner
No jet or leakage from high pressure
The pump functions but does not reach
When the lance is open, the pressure
In by-pass or total stop phase, the water
When the temperature regulator is brou-
ght to the required position, the boiler
English
TROUBLE-SHOOTING
CAUSES
Thermal protection has tripped
Faulty connection to the mains water
Faulty connection to the mains water
Pressure regulation valve is set at
Pressure adjustment devices on lance
Micro-leaks of water from the high
Motor rotation direction incorrect on
Fuel contaminated with impurities or
IMPORTANT:
28
REMEDIES
Reset (if it trips again, apply to the
Check the level of diesel in the tank
and make sure the fuel supply circuit
Contact Service Centre