IPC Kosmic-H PW-H31 Manual De Instrucciones página 27

MAINTENANCE
ONLY THE OPERATIONS AUTHORIZED IN THIS
INSTRUCTIONS MANUAL MAY BE CARRIED OUT BY
THE USER.
ALL OTHER OPERATIONS ARE FORBIDDEN.
!
Danger
For maintenance of the boiler, high pressure pump, the elec-
trical parts and all parts with a safety function, you must apply
The manufacturer is not liable in case of tampering, changes,
incorrect repairs or maintenance carried out
chine by a third person not provided with the manufacturer's
All documents pertaining to the repair and planned service
installation according to the laws in force (in compliance with the
provisions of the IEC 60364-1 standard) must be kept carefully
Periodically, at least once a year, have the safety devices
and the rated values checked at one of our technical service
Particularly, as for the hot water high pressure cleaner, which
The rating done by the manufacturer determines a produc-
tion of exhaust gases with a CO content lower than 0,04%
!
Danger
Disconnect the water cleaner from the mains electricity sup-
ply via the omnipolar switch or by unplugging the plug from
the socket and close the water supply tap (see chapters on
connecting to the electricity and water mains) before carrying
completed, ensure that the closing panels have been correctly
reassembled and anchored with the screws provided before
PRECAUTIONS AGAINST FROST
If the cleaner is left in premises where it is exposed to frost,
when work is over or for storage, antifreeze must be used to
English
OPERATIONS FOR USING
1
(tap), disconnect the hose
and run the cleaner until it is
2) Stop the water cleaner with
the ON/OFF switch in the "O"
3) Prepare a container with
4) Immerse the tube in the
container with the anti-freeze
on the ma-
5) Start the water cleaner with
the ON/OFF switch in the "I"
6) Start the cleaner and let it
run until antifreeze comes out
7) Suck up antifreeze with the
8) Disconnect the water
cleaner from the mains elec-
tricity supply via the omnipolar
switch or by unplugging the
9) For high pressure cleaners
provided with water tank, the
detergent solution prepared
as described in the point 3,
must be poured directly into
!
Warning
Anti-freeze may cause envi-
follow the instructions given
CHECKING PUMP OIL LEVEL AND OIL CHANGE
From time to time check the oil level in the high pressure pump
If the oil has a milky appearance, call the technical service
Proceed as follows:
1
2
3
4) Replace the drain screw and pour fresh oil in through the
25