IPC Kosmic-H PW-H31 Manual De Instrucciones página 25

USING
THE CLEANER
CONTROL PANEL
A
B - Burner switch
C
D
E
F
STARTING THE CLEANER
1
2) Connect the water cleaner to the mains electricity supply by
3
!
Warning
The high pressure water jet generates a reaction force in the
4
5) To operate the water cleaner with hot water, turn the tempera-
!
Warning
In water cleaners with the "Total Stop" system, the motor starts
and stops when the lever on the lance handle is actioned or
!
Danger
WARNING SIGNALS AND FAULTS DISPLAYED.
Power is on when the indicator is perma-
nently alight (switch "A" in position I); when the indicator light
Diesel level; when alight, indicates that the
Indicator permanently alight: 250 h sched-
been carried out by an IPC-approved Service Centre, the light
Warns when faults occur
- 2 blinks: Micro-leak alarm
English
A A B B
C
D
E
F
23
IMPORTANT!
nozzle and cause malfunc-
tion (Fig. 8).
USING THE ACCESSO-
RIES.
The high pressure washer has
ROTARY HEAD (optional
The high pressure washer
rotary nozzle to clean the most
!
Danger:
Aim the jet from a certain
distance to avoid damage
Do not aim the jet at people,
USING THE ADJUSTABLE
HEAD (Fig. 9)
To use the detergent solution,
an extension wand must be
head (supplied as an optional
The adjustable head enables
you to select a low or high
REGULATING PRESSURE.
This chapter concerns only
those models provided with
the "pressure regulating" de-
When knob C is turned in
an anti-clockwise direction
(B) (minimum), the working
A A B B