Operation
Timer
If your hob has this function, you can activate it in two different ways:
1.
You can use it as a minute timer. In this case, the timer will not switch off any cooking zones when the
set time has elapsed.
2. You can program it to switch off one or more cooking zones after the set time has elapsed.
The timer has a maximum duration of 99 minutes.
Using the timer as a minute reminder (For models without Slide control)
(If no cooking zone has been selected)
Make sure that the hob is switched on. To be able
to use the timer, at least one zone must be active.
Touch the "+" key on the timer. The timer
indicator will start flashing and "10" will be shown
on the display.
Set the time by pressing the "-" or "+" buttons on
the timer. Touch the "-" or "+" buttons on the timer
once to decrease or increase the time in 1 minute
intervals. Press repeatedly press the "-" or "+"
buttons on the timer to decrease or increase the
time by 10 minutes.
By touching "-" and "+" at the same time, the timer
is cancelled, and "00" will be shown on the display.
When the time is set, the countdown starts. The
display will show the remaining time and the timer
will flash for 5 seconds.
At the end of the set time, the timer indicator will
beep for 30 seconds. The timer indicator will
display "- -" when the set time has expired.
49
English
infiniton.es