MSW Motor Technics MSW-GP-100 Manual De Instrucciones página 31

H. Recoil starter handle
I. Fuel valve
J. Choke control valve
K. Water filler cap
L. Air filter housing
M. Engine oil drain plug
N. Residual water drain plug
O. Water intake nozzle
P. Water filter (suction)
3.2.
Preparing for use
APPLIANCE LOCATION
Use the unit only in open spaces or well-ventilated areas. Do not block the air inlet
or exhaust of the unit. Keep the unit away from any hot surfaces. Always operate
the unit on a level, stable, fireproof and dry surface and out of the reach of
children and persons of impaired mental, sensory and intellectual functions. The
work area of the unit should provide immediate access to the power switch.
ASSEMBLY OF THE UNIT
The unit is a free-standing unit. Before use, connect hoses with adapters for the
water inlet
Place a filter (P) on the end of the water intake hose.
IMPORTANT: Do not operate pump without the water filter.
Secure the hoses at the ends with the included clamps. Secure the water filter at
the end of the suction hose in the same way. Hose lengths must not exceed the
specified parameters.
EN
end (O) and outlet end (D).