MSW Motor Technics MSW-GP-100 Manual De Instrucciones página 38

• If it only needs to be cleaned, remove deposits on the electrode, e.g. with
a wire brush or fine sandpaper, or rinse it in extraction naphta using a
brush. Check the electrode gap before reassembly and adjust if necessary.
• Also check the gap at the electrode when installing a new spark plug.
IMPORTANT: It is advised to remove a spark plug when the engine is cold
or has cooled down.
CAUTION: A spark plug that has recently been in service can be hot - risk
of burns!
l) Inspect and clean the air filter regularly and replace with a new one if
necessary.
• To access the air filter, unscrew the wing nut and remove the housing,
among other things (see pictures below).
• The sponge filter element (marked with an arrow on the picture below) is
removable and can be rinsed in warm water with detergent or extraction
gasoline.
• Completely dry the sponge filter before immersing it in a fresh engine oil
and then squeezing out the excessive amount of oil from it.
IMPORTANT: do not operate unit without the air filter!
EN