MSW Motor Technics MSW-PG3000 EASY Manual De Instrucciones página 37

3.3.
Working with the device
3.3.1 Before starting up for the first time
Place the motor on a level, solid surface, not tilted more than 20
•
the proper vertical.
• Fill up with engine oil, as the engine is deprived of it during transport. To
do this, unscrew the oil plug and fill up with engine oil through it until the
level reaches the correct level on the plug's dipstick (only one plug has a
check dipstick) - preferably close to the maximum permissible level. The
oil level should be checked by screwing in/inserting the plug with the dry
dipstick into the engine and after a few seconds unscrewing it again and
checking the oil level on the dipstick.
IMPORTANT: Do not overfill the engine oil - it can damage the engine! If
the oil level exceeds the permissible level, suck out the excess oil. Always
check the engine oil level with the engine off and cold or cooled.
EN
from
o