Publicidad
Idiomas disponibles
Idiomas disponibles
_K
TAPE
II-
A_EJECT--
Deck 1
DOWN,
_UP
A EJECT
Deck 2
Use'Type I (normal) tapes only.
1 Press TAPE and press _
EJECT to open the
cassette holder.
To select
a playing
deck
When tapes are loaded in both decks, press TAPE first to select
a deck.
The selected
deck number is displayed.
To stop play, press I.
To pause play (deck 2 only), press II. To resume play, press
again.
To change the playback side (deck I only), press <11_ in play
or pause mode.
To fast forward or rewind, press _
or I_.
Then press • to
stop the tape.
To start play when the power
is off (Direct
Play Function)
Press TAPE.
The power is turned
on and play of the inserted
tape begins.
To set the tape counter to 0000
Press • CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
When tapes are loaded in both decks
After playback of both side (front and back) on deck 1 finishes,
the tape in the deck 2 will start to play without interruption and
will stop at the end of the front side of the tape. (Continuous
play)
Insert
a tape with the exposed
side down. Push the cassette
holder to close.
2 Press <11_ to start play.
The selected
deck number
The tape counter
indicates
/
the tape running
length.
Playback
side indicator
MUSIC SENSOR
(deck I only)
If there is a 4-second
or longer
blank
between
each track,
a
search
for the beginning
of the current
or next track
during
playback
can be done easily.
Press <1<1 or _
during playback
referring to the playback
side
indicator
(<1 or II_) on the display.
For example, when _
is pressed while I_ is displayed,
playback
of the next track starts after searching.
Music sensor function may not be able to detect tracks under the
following conditions:
• Blanks of less than 4 seconds between tracks
• Noisy blanks
• Long passages of low-end sound
• Low overall recording levels
I_-: The front side is being played
(forward).
<11: The back side is being played (reverse).
11
ENGLISH
Publicidad
