Publicidad
Idiomas disponibles
Idiomas disponibles
MULTI JOG
4
...........
/ I
,
"l il
1,8
...........
..................
The AI edit recording function enables CD recording without
worrying about tape length and track length. When a CD is
inserted, the unit automatically calculates the total track length.
If necessary, the order of tracks is rearranged so that no track is
cut short.
(AI: Artificial Intelligence)
AI edit recording will not start from a point halfway into the tape.
The tape must be recorded from the beginning of either side.
1 Insert the tape into deck 2.
Insert the tape with the side to be recorded
on first facing out
from the unit.
2 Press CD and load the disc(s).
3 Press EDIT/CHECK once while pressing SHIFT
on the remote control,
"EDIT"appears,
EDIT
• When
"PRGM"
is displayed,
press
EDIT/CHECK
while
pressing
SHIFT
again.
4 Press DISC DIRECT PLAY 1-3 to select a disc.
5 Press
numbered
buttons
0-9 on the remote
control to designate the tape length.
10 to 99 minutes
can be specified•
Example:
When using a 60-minute
tape, press 6 and 0.
In a few seconds,
the tracks to be recorded
on each side of
the tape are determined.
• <1,<1, _
or MULTI JOG are also available
to designate
the tape length.
Remaining
time
Programmed
Tape length
of recording
tracks for side A
Press •
REC/REC MUTE to start recording on
the first siide,
The tape is rewound to the beginning
of the first side, the
lead segment is played through for 10 seconds,
and recording
starts. When the last track programmed
for' side A is finished,
deck 2 enters
the recording
stop
mode. After entering
the
recording
stop mode, go to step 7.
7 Press EDIT/CHECK while pressing SHIFT on the
remote control to display the program for the
second recording.
"B"is displayed.
8 Turn over the tape in deck 2 and press •
REC/
REC MUTE to start recording on the second side.
To stop recording
Press •. Recording and CD play stop simultaneously.
To clear the edit program
Press • CLEAR twice so that "EDIT" disappears on the display.
To check the order of the programmed track numbers
Before recording, press EDIT/CHECK while pressing SHIFT on
the remote control to select side A or B, and press <1<1or IH_
repeatedly.
Programmed
Track number
track numbers
Program
number
To add tracks from other discs to the edit program
If there is any time remaining on the tape after step 5, you can
add tracks from other discs in the CD compartment •
1 Press EDIT/CHECK while pressing SHIFT on the remote
control to select side A or B.
2 Press DISC DIRECT PLAY 1-3 to select a disc.
3 Press numbered buttons on the remote control to select tracks.
A track who,_e playing time is longer than the remaining time
cannot be programmed.
4 Repeat steps 2 and 3 to add more.tracks.
Time
on cassette
tapes
and editing
time
The actual cassette
recording
time is usually a little longer than
the specified
recording
time printed
on the label.
This unit can
program
tracks to use the extra time.
When the total recording
time
is a little longer
than the tape's
specified
recording
time
after editing,
the display shows the extra time (without
a minus
mark), instead
of the time remaining
on the tape (with the minus
mark).
The AI edit
recording
function
cannot
be used
with
discs
containing
31 tracks or more.
* CD EDIT/CHECK
on the unit is also available
instead
of EDIT
CHECK on the remote control
Tape side
A: First recording
side
B: Second
recording
side
ENGLISH
14
Publicidad
