Publicidad
Idiomas disponibles
Idiomas disponibles
GEQ
LOW
ENTER
MULTI
JOG
DISP
HIGH
illOO_
- GEQ
- SHIFT
SELECTING
THE
PROGRAMMED
EQUALIZATION
CURVE
This
unit
provides
the
following
5 different
programmed
equalization
curves.
ROCK:
Powerful
sound emphasizing
treble and bass
POP: More presence
in the vocals and midrange
JAZZ: Accented
lower frequencies
for jazz-type
music
CLASSIC:
Enriched
sound with heavy bass and fine treble.
LATIN:
JAZZ- type equalization
curve with
higher frequencies
Press GEQ, and turn MULTI JOG to select one of the
programmed
equalization
curve within 4 seconds.
GRAPHIC EQUALIZER
"GRAPHIC EQUALIZER" appears (except "GEQ OFF") and the
GEQ mode is displayed cyclically as follows.
_
ROCK--_
POP ----*JAZZ ---* CLASSIC ---_ LATIN
" .........
Programmed
mode ..........
;
|
GEQ OFF *_
M4 -,_
M3 *---
M2 _
M1
(cancel)
'
.......
Manual mode
......
To display the current GEQ mode
Press GEQ. The current mode is displayed for 4 seconds.
To cancel the selected mode
Press GEQ, and turn MULTI JOG to select" GEQ OFF" within 4
seconds. "GRAPHIC EQUALIZER" disappears.
To select with the remote control
Press GEQ repeatedly while pressing SHIFT. The GEQ mode is
displayed cyclically as above.
To change
the spectrum
analyzer
display
3 patterns
of spectrum
analyzer
display can be shwon.
Press DISP once, and turn MULTI JOG within 4 seconds to select
the desired spectrum
analyzer
display.
SETTING
A NEW EQUALIZATION
CURVE
MANUALLY
The equalization curve can be customized to suit your preference.
1 Press LOW,
The lowest level frequency indicator flashes for 4 seconds.
2 Within
4 seconds,
turn MULTI
JOG to adjust
the
level of the lowest
frequency.
3 Press HIGH.
The highest
level frequency
indicator
flashes
for 4 seconds.
4 Within 4 seconds, turn MULTI JOG to adjust the
level of the highest frequency.
The frequency
level indicators
of between
the lowest and the
highest
are adjusted
accordingly.
MEMORIZING
THE NEW
EQUALIZATION
CURVES
Up to 4 customized equalization curves can be stored as the
manual modes M1 - M4.
1 Set a new equalization curve with HIGH, LOW and
MULTI JOG.
See "SETTING A NEW EQUALIZATION
CURVE MANUALLY".
The created
curve is displayed
for 4 seconds.
2 Within 4 seconds,
press ENTER.
"M 1" flashes
on the display for 4 seconds.
• If this step is not completed
within 4 seconds,
press GEQ
first to display
"GEQ
ON". Then
press
ENTER
wtihin
4
seconds.
3 Within 4 seconds, turn MULTI JOG to select one
of the manual modes M1 - M4 to store the curve.
4 Within
4 seconds,
press ENTER.
The new equalization curve is stored.
To select
the stored
equalization
curve
Press GEQ,
and turn MULTI JOG to select one of the manual
modes M1 - M4 within 4 seconds.
7
ENGLISH
Publicidad
