CHANGING SPEED MODE (Fig. 17)
This machine features three speed
modes. Each speed modes sets the
maximum speed of the chain saw.
The speed mode will change with every
press of the chain speed shifter.
The speed level on the LCD screen will
display the active speed mode: one bar
for low speed, two bars for medium
speed, and three bars for high speed.
The low speed mode (ECO) provides
better control of the machine and longer
operating time per charge.
NOTE: When using EGO battery pack rated 4.0Ah or less, only the ECO mode is
available. And use of EGO battery pack rated less than 6.0Ah will not allow you to
achieve high speed. For best performance, we strongly recommend use of EGO battery
packs that are 6.0Ah (e.g., BA3360T/BA3360T-FC) or more.
NOTE: The chain saw features chain speed memory function. The next time the chain
saw is turned on, the previously used speed mode will be activated.
NOTE: The LCD screen lights up when trigger switch is pulled or when the oil-
feeding button or headlight/Bluetooth button is pressed. By default, the LCD screen
automatically turns off after about 1 second of inactivity.
NOTE: Pressing the chain speed shifter will not turn on the LCD screen.
LOAD LEVEL (Fig. 17)
The load level on the right side of the LCD screen shows the current load on the
machine. The higher number of bars indicates the higher load and the lower number
of bars indicates the lower load. This feature is primarily intended for experienced gas-
powered chain saw users that may not have the "feel" of how the battery-powered saw
behaves under different loads. It helps users monitoring workload so as to avoid long
time operation under heavy load, which can make the chain saw stops during operation
because of getting too hot.
32
56-VOLT CORDLESS COMMERCIAL 20" CHAIN SAW — CSX5000/CSX5000-FC
Headlight Icon
17
Bluetooth Icon
Fuel-gauge
Circle
Speed
Level
Low Oil
Indicator
Oil-feeding
Button
Chain Speed
Shifter
Brake Icon High-
temperature
Indicator
Load Level
Oil Output
Level
Headlight/
Bluetooth
Button