EGO Commercial CSX5000 Manual Del Operador página 34

NOTE: The sensors will only detect sudden motion of the saw in the plane of the
guide bar. The sensors will not detect any sudden motion of the saw sideways (i.e.,
perpendicular to the plane of the guide bar).
OIL OUTPUT LEVEL AND LOW OIL INDICATOR (Fig. 17)
The machine automatically lubricates the chain. This chain saw allows you to change
the oil output rate with every press of the oil-feeding button.
NOTE: The oil output rate can only be changed when the saw chain is not running.
The oil output level on the LCD screen will display the oil output rate. One bar for low
output rate, two bars for medium output rate, and three bars for high output rate.
Choose a higher output rate for faster chain speed. If the saw chain gets dry during
work, stop the motor and choose a higher oil output rate.
When the oil level is low, the low oil indicator
above the oil output bars will
appear on the LCD screen and only low output rate will be available. Stop the chain
saw and refill the oil tank following the chapter "FILLING OIL TANK WITH BAR AND
CHAIN LUBRICANT" earlier.
After filling the oil tank, run the chain saw for about 10 seconds to allow the automatic
lubrication system to start working and the indicator will disappear from the LCD
screen.
NOTICE:
If the indicator is still on the LCD screen after performing the above
steps, the system may be damaged. Stop using the chain saw and contact an EGO
authorized service center for repair.
BLUETOOTH WIRELESS TECHNOLOGY
®
Products with built-in Bluetooth wireless technology can connect to mobile devices
®
using EGO apps. Please visit www.egopowerplus.com/commercial for instructions on
how to connect your machine to EGO apps.
The Bluetooth symbol lights up when the machine is connected to your mobile
®
device.
34
56-VOLT CORDLESS COMMERCIAL 20" CHAIN SAW — CSX5000/CSX5000-FC