EGO Commercial CSX5000 Manual Del Operador página 33

HIGH-TEMPERATURE INDICATOR (Fig. 17)
The high-temperature indicator
194°F (90°C) or the battery temperature exceeds 158°F (70°C) during operation.
The temperature-protection circuit will immediately shut off the machine to prevent
overheating damage. Release the trigger and wait until the overheated machine or
battery cools down and high-temperature indicator turns off, then restart the machine.
BRAKE ICON (Fig. 17)
The brake icon
position (see Fig. 1), as described in the section "KICKBACK SAFETY DEVICES ON
THIS CHAIN SAW" earlier.
The brake icon will be flashing when the omni-directional chain brake system stops the
saw. See the next chapter for detailed information.
OMNI-DIRECTIONAL CHAIN
BRAKE SYSTEM
(Fig. 18a and Fig. 18b)
WARNING:
chain brake system is not intended to act
as a substitute to the standard/traditional
chain brake. The user should never rely
on this feature during operation of the
chain saw to protect against kickback.
Always follow safety instructions related
to kickback mitigation found in the
warning section of this manual.
The chain saw comes equipped with omni-
directional chain brake system that utilizes
onboard sensors to monitor the movement
of the chain saw and will engage the brake
if a sudden motion of the saw in the plane
of the bar is detected.
When the omni-directional chain brake system is activated and stops the saw, the
brake icon will be flashing on the LCD screen (Fig. 17). Release the trigger switch,
remove the saw chain and guide bar from the wood, then restart the chain saw.
56-VOLT CORDLESS COMMERCIAL 20" CHAIN SAW — CSX5000/CSX5000-FC
lights up when the machine temperature exceeds
appears on the LCD screen when the brake paddle is in brake
The omni-directional
18a
18b
Sensors will NOT detect
sudden motion in this
plane.
Sensors WILL detect
sudden motion in this
plane.
33