Fronius Robacta Drive CMT-PAP G Manual De Instrucciones página 37

Changing the
torch neck
Danger from extremely hot welding torch.
Can result in serious burns.
▶
Danger from tightening the torch neck with excessive torque.
Destruction of coupling point can be the result.
▶
NOTE!
Before fitting the torch neck, ensure that the coupling point is not dirty.
* Do not turn it any further than it will go.
1
1
3
WARNING!
Changing, cleaning and inspection of components may only be carried out
when torch body has cooled down.
CAUTION!
Fasten the torch neck at the specified torque to prevent charring of the cou-
pling point.
1
2
2
2
4
1
* max. 1 - 1,5
*
0 mm
.0 inch
1
37