Fronius Robacta Drive CMT-PAP G Manual De Instrucciones página 44

Set Contact
Pressure
Danger of injury due to rotating feed rolls.
This can result in serious personal injuries.
▶
IMPORTANT! The adjuster screw can only be adjusted when the welding wire has
been fed in. The values stated are applicable when the adjuster screw is closed.
1
3
44
CAUTION!
Do not touch the feed rolls.
1
2
-
AlMg 100-150N
2
Al- AlSi 80-120N
4
Fe, CrNi, CuSi 150-200N