Fronius Robacta Drive CMT-PAP G Manual De Instrucciones página 32

Safety
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger from machines that start up automatically.
This can result in serious personal injury and damage to property.
▶
▶
Danger from electric current.
This can result in serious personal injury and damage to property.
▶
▶
Danger from electric current due to defective system components and incor-
rect operation.
This can result in serious personal injury and damage to property.
▶
▶
Danger due to emerging wire electrode.
This can result in serious personal injuries.
▶
▶
▶
▶
32
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this device
and all system components.
WARNING!
In addition to these operating instructions, the safety rules issued by the ma-
nufacturer of the robot and welding systems must also be observed.
For your personal safety, ensure that all protective measures have been ta-
ken and will remain in place for the duration of your stay within the working
area of the robot.
WARNING!
Before starting work, switch off all the devices and components involved and
disconnect them from the grid.
Secure all the devices and components involved to prevent unintentional re-
starting.
WARNING!
All cables, leads and hosepacks must always be securely connected, unda-
maged and correctly insulated.
Only use adequately dimensioned cables, leads and hosepacks.
WARNING!
Hold the welding torch so that the tip of the welding torch points away from
the face and body.
Wear suitable protective goggles.
Do not point the welding torch at people.
Ensure that the wire electrode does not touch any electrically conductive ob-
jects.