Publicidad
Idiomas disponibles
Idiomas disponibles
5.2.
How to start charging (without authentication)
If eProWallbox is configured with Autostart Operating Mode as the default setting, the following
operations must be performed:
1.
The display of the wallbox must be in "Idle Mode" – ready for charging.
2.
Insert the plug of the charging cable into the available socket on the device, until it is
fully engaged.
3.
Insert the plug of the Type 2 cable in the Charge Port of the electric vehicle.
4.
If a fault error appears on the Wallbox display, please consult the chapter 6 Troubleshooting.
5.
The device will lock the cable for the duration of the entire charging session.
6.
The charging session starts, and charging information is displayed on the display.
7.
When charging is complete or you need to stop the charging process, press the "Stop"
button on the Wallbox display of the device.
8.
The charging cable can then be removed from the device and from the electric vehicle.
9.
The product returns to its initial state, ready for a new charging session.
227
Publicidad
