Free2Move eSolutions eProWallbox Manual De Uso página 228

5.3. How to charge with authentication
Charging can be accessed in two additional modes if the Authentication Operating Mode is
configured with an RFID swipe card or via app.
1.
Proceed as per the instructions provided in the previous point, until the cable is inserted
(step 3).
2.
Pass the user RFID card over the appropriate area, or start remotely via app.
3.
Charge the vehicle.
4.
When charging is complete or the charging process needs to be stopped, press the
"Stop" button on the wallbox display of the device. Alternatively, the user must swipe the
RFID user card over the designated area to allow the socket in use to be unlocked and
end the charging session. The charging process can be halted remotely via app.
5.
The charging cable can then be removed from the device and from the electric vehicle.
6.
The product returns to its initial state, ready for a new charging session.
228