Publicidad
Idiomas disponibles
Idiomas disponibles
SWEEP
Press SW button to turn on/off the louvre stepper motor.
NB: if the indoor fan is stopped by other functions or protective systems, the louvre will be forced to stop and the SW key will not be enabled.
LOUVRE
Press LV button to change the angle of the louvre stepper motor.
• Press and release the button to change the angle of the ventilation louvre one step at a time.
• Press and hold the button to change the angle of the ventilation louvre continuously (until the button is released).
NB: when the LV or LOUVRE button is pressed, the Sweep function is annulled.
Louver 1
Louver 2
Louver 3
CLOCK
The clock on the LCD of Remote unit can be set by
•
If you press the
key, the
•
Press
or
to set the clock. Hold the button for fast changing.
•
Press again, the symbol
AUTO START TIMER
The air-conditioner can be programmed to turn on in advance.
•
If you press
ON, the ON symbol and the start time will flash.
•
Press
or
to set the start timer. Hold the button for fast changing.
Pressing
ON again, the ON symbol and the start time will stop flashing.
To annul this function, press
AUTO STOP TIMER
The air-conditioner can be programmed to turn off in advance.
OFF, the OFF symbol and the stop time will flash.
• If you press
• Press
or
to set the stop timer. Hold the button for fast changing.
OFF again, the OFF symbol and the stop time will stop flashing.
• Pressing
To cancel this function, press the button again.
SLEEP
Press the SLEEP button to activate the Sleep function. The LCD on the remote unit will show the
After 1 hour, the controlled temperature will be automatically adjusted for greater comfort and energy savings during Sleep mode. The
symbol on LCD will disappear at this moment.
To cancel this function, press SLEEP key again.
NB : the SLEEP function can only be used in COOL, HEAT or AUTO mode.
KEYLOCK
Hold the
button for 3 seconds will lock all the buttons on the remote unit. The LCD on the remote unit will show the
Press and hold the
key again for 3 seconds, to release them.
SEND
Press SEND to transmit all the parameters shown on the LCD to the main control board.
TEMPERATURE MEASUREMENT UNIT
Press
and
for 5 seconds to switch from °C to °F and vice versa.
36
Louver 4
Louver ON
symbol and the time will flash.
and time display will stop blinking.
POWER OFF
POWER OFF
ON again.
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
Louver OFF
POWER ON
POWER ON
COLD
COLD
POWER ON
POWER OFF
POWER OFF
POWER OFF
POWER ON
POWER ON
POWER ON
POWER ON
COLD
COLD
COOL
COOL
POWER ON
HEAT
HEAT
POWER OFF
COOL
POWER OFF
POWER ON
COLD
POWER OFF
COOL
Auto
POWER OFF
POWER ON
POWER ON
POWER ON
POWER ON
POWER ON
COOL
COOL
HEAT
HEAT
COLD
COLD
POWER ON
COOL
POWER ON
COLD
POWER ON
COOL
HEAT
COLD
COOL
POWER OFF
POWER ON
POWER ON
POWER ON
COOL
COOL
POWER ON
HEAT
HEAT
POWER ON
COLD
COOL
HEAT
POWER ON
POWER OFF
MODE
COOL
HEAT
SLEEP
POWER ON
LIGHT
COOL
HEAT
COOL
POWER OFF
POWER ON
POWER ON
COLD
COLD
POWER ON
POWER ON
COOL
COOL
HEAT
HEAT
POWER ON
COLD
COLD
POWER ON
COLD
POWER ON
POWER ON
COLD
COOL
HEAT
HEAT
POWER ON
POWER ON
HEAT
COLD
Auto
F
C
HEAT
POWER ON
symbol.
HEAT
COLD
ON
SEND
OFF
POWER ON
SET
HEAT
Auto
Auto
F
C
symbol.
MODE
SEND
ON
SLEEP
OFF
LIGHT
SET
Publicidad
