Fitting The Chest Belt - Invacare Aquatec Ocean E-VIP Manual De Instrucciones

Shower and Toilet Commode Ocean E-VIP

4.4 Fitting the chest belt

!
IMPORTANT
▸ Install both mounting brackets at the same height.
▸ Installation of the left and right mounting brackets is late-
rally inverted.
1. Open the belt buckle on the backrest cover at the height where the
chest belt is to be fitted.
2. Pass this belt on the inside of the backrest frame and
close it again.
3. Place inner section D of the mounting bracket (without bolt with
internal thread) around the backrest frame so that the hole faces
backwards.
4. Place the outer section B of the mounting bracket with the bolt
with internal thread into the hole of the inner section.
5. Attach the two parts of the mounting bracket in the required posi-
tion with screw C on the backrest frame.
6. Attach chest belt E with the screw with hand knob A to the
mounting brackets.
8
D
E B
C
A
Adjusting the chest belt position
!
IMPORTANT
▸ Adjust the position of the chest belt to suit the user.
▸ Adjust the position of the two mounting brackets equally on
both sides.
▸ The position of the right and left mounting brackets is
adjusted in the same way.
1. Open the belt buckle on the backrest cover which is passed on the
inside of the backrest frame at the height where the chest belt is
secured.
2. Open the belt buckle on the backrest cover at the height where the
chest belt is to be fitted.
3. Pass this belt on the inside of the backrest frame and close it again.
4. Undo the screw with hand knob A.
5. Remove chest belt E.
6. Remove the two parts of the mounting bracket B and D and move
them to the required position.
7. Place the inner part of mounting bracket D around the backrest
frame.
8. Place the outer section of mounting bracket B on the bolt with
internal thread C of the inner section.
9. Use the screw with the hand knob to screw the chest belt onto the
mounting bracket.
10. Pass the open belt of the backrest cover on the outside of the back-
rest frame and close it again.
11. Tighten all belts.
Adjusting the chest belt length
!
IMPORTANT
▸ Adjust the length of the chest belt to suit the user.
The length of the chest belt is adjusted via the belt buckle on the chest
belt. If the belt buckle adjustment range is insufficient, adjust the length
at the mounting brackets as follows:
Assembly and installation