Publicidad
Idiomas disponibles
Idiomas disponibles
Your product has the protection class of I. Plug the product in a grounded
•
socket that conforms with the Voltage, Current and Frequency values
specified in the type label. The socket outlet shall be equipped with a fuse
with a rating of 10 A – 16 A. Our company shall not be responsible for the
damages that shall be incurred as a result of operating the product without
ensuring ground and electrical connections made as per local or national
regulations.
The product's power cable must be unplugged during installation.
•
Otherwise, risk of electric shock and injury may occur!
• Do not plug the product to loose, broken, dirty, greasy sockets or
sockets that has come out their seats or sockets with a risk of
water contact.
• Place the power cord and hoses (if available) of the product so
that they shall not cause a risk of tripping over.
• Penetration of humidity to live parts or to the power cord may
cause short circuit. Thus, do not use the product in humid
environments or in areas where water may splash (e.g. garage,
laundry room, etc.) If the refrigerator is wet by water, unplug it
and contact an authorized service.
• Do not connect your refrigerator to power saving devices. These
systems are harmful for the product.
1.6 Operational safety
• Do not use chemical solvents on the product. These materials
contain an explosion risk.
• In case of a failure of the product, unplug it and do not operate
until it is repaired by the authorized service. There is a risk of
electric shock!
• Do not place a source of flame (e.g. candles, cigarettes, etc.) on
the product or in the vicinity of it.
• Do not get on the product. Risk of falling and injury!
• Do not cause damage to the pipes of the cooling system using
sharp and piercing tools. The refrigerant that sprays out in case
6
Publicidad
