BRASSELER USA EndoPro Ai1 Manual De Instrucciones página 40

The model EndoPro Ai1 is intended for use in electromagnetic environment in which
radiated RF disturbances is controlled. The customer or the user of the model EndoPro
Ai1 can help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and the
model EndoPro Ai1 as recommended below, according to the maximum output power of
the communications equipment.
Rated maximum
output power
of transmitter W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to
the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) accordable to the transmitter manufacturer.
NOTE I At 80 MHz and 800 MHz. the separation distance for the higher frequency
range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation
is aff ected by absorption and refl ection from structures, objects and people.
Separation distance according to frequency of transmitter m
150kHz to 80MHz
1/2
d=1.2×P
0.12
0.38
1.2
3.8
12
80MHz to 800MHz
1/2
d=1.2×P
0.12
0.38
1.2
3.8
12
38
800MHz to 2,7GHz
1/2
d=2.3×P
0.23
0.73
2.3
7.3
23