Toro TimeCutter 5000 Manual Del Operador página 35

Figure 37
5. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
38).
Figure 38
6. Dispose of the used oil at a recycling center.
Changing the Engine-Oil Filter
Service Interval: Every 200 hours—Change the
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Change the engine-oil filter
g027539
(Figure
Note:
the engine, and then turn the oil filter an extra
3/4 turn.
3. Fill the crankcase with the proper type of new
oil (Figure
g235264
33
engine-oil filter (more often in dirty
or dusty conditions).
32).
(Figure
Figure 39
Ensure that the oil-filter gasket touches
38).
Changing
39).
g027477