Publicidad
Idiomas disponibles
Idiomas disponibles
INDOOR UNIT INSTALLATION
Step4: Connecting Refrigerant Pipe
4.1 According to the wall hole position, when piping outlet is on the left or right ,
should use scissors along the notch to cut the blanking plastic sheet on the chassis.
Note: When cutting off the plastic sheet at the outlet, the cut should be trimmed to smooth.
Chassis
Blanking plastic sheet
4 sce ws
4.2 Find out the switches on both side of panel ,slide the switch to OPEN to loosen the top
of panel, then hold the panel and incline it toward yourself and take down the panel.
Switch OPEN
4.3 Unscrew the 4 screws of panel frame(see the picture on 4.1), loosen the bottom of the frame,
then hold the top of the frame(Air outlet), lift and pull to take down the panel frame.
17
Publicidad
