MSW -PG-100 Manual De Instrucciones página 36

• If the generator is overloaded or if there is a short in the connected appliance the overload
indicator LED (red) will go ON and current to the connected appliance will be shut off. The output
indicator LED (green) will turn off. The power indicator LED (green) illuminates when power is
available to outputs.
• Substantial overloading that continuously lights the overload indicator light (red) may damage the
generator. Marginal overloading that temporarily lights the overload indicator LED (red) may
shorten the service life of the generator. Stop the engine if the overload indicator light (red)
switches ON and investigate the overload source.
Overload protection
If the overload switch has tripped and cuts off the power, be sure that all appliances are in good
working order before connecting them to the generator. If an appliance begins to operate
abnormally, becomes sluggish, or stops suddenly, turn "OFF' the generator.
1) Disconnect the appliance and push the engine switch into the off position.
2) Start the generator as described in "Starting the engine" section.
3) Refit the appliance, if the Overload trips again then the equipment / appliance needs to be
checked.
EN