AENO HB1 Guia De Inicio Rapido página 12

Food processor (grating/shredding)
Insert the grating/shredding blade holder into the food processor.
Place the grating/shredding blade on the holder with fine blades
(for grating) or wide blades (for shredding) facing up. Close the
food processor with the lid. Insert the blender into the opening
on the lid.
Note. After the blender has been turned on (see "Operating
instructions" below), add ingredients for grating or shredding
into the food processor through the opening on the lid. Use the
supplied tamper stick to add the ingredients
WARNING! Do not exceed the "MAX" mark when filling the measuring cup,
chopper, or food processor.
Operating instructions
1. Insert the plug of the power cord (1) (fig. C) into a socket.
2. Press and hold the button (2) to turn the blender on.
3. Adjust the rotation speed by applying different force on the button. The
number of lit indicators (3) will change depending on the rotation speed:
≤ 12,400 rpm (±10 %) – 1 indicator
≤ 13,600 rpm (±10 %) – 2 indicators
≤ 14,000 rpm (±10 %) – 3 indicators
Note. The body of the blender (4) can get very hot when operating at high
speed for a long time. Turn off the device every 10–60 seconds for 2–3 minutes,
depending on the vessel load.
WARNING! Do not open the lid of the chopper or the food processor while the
device is operating. Do not block the blades or other moving parts of the device.
4. To turn off the blender, release the button (2).
5. Wait until the blades stop rotating completely.
12
≤ 14,500 rpm (±10 %) – 4 indicators
≤ 15,300 rpm (±10 %) – 5 indicators
aeno.com/documents