Pipmix Mode - StarLab ErgoOne E Instrucciones De Manejo

5.2

PIPmix mode

Program for mixing liquids. Sample is aspirated and dispensed repeatedly. Volume and speed
setting, see Set volume and Set the aspiration and dispensing speed.
1x
c. Confirm PIP mode: Press 'Enter' key.
The display now shows 'blo' for blow-out.

d.
Preparing for pipetting: Press the pipetting key
once to move the piston to its start position.
The arrow in the display points upwards

(aspiration).
1x
e. Aspirate liquid: Press the pipetting key once
to aspirate the liquid.
1x
f. Dispense liquid: The liquid is dispensed by
pressing the pipetting key once.
The arrow in the display points downwards

(dispensing).
1x
g. Trigger blow-out? You do not have to do anything.
When pipetting in PIP mode, the blow-out is
performed automatically.
3x
a. Call up menu selection: Pressing the menu key
three times takes you to the program selection.
'Mode' flashes.

b.
Set PIPmix mode: Use one of the arrow keys to
scroll through the modes until 'PIPmix' appears.
'Mode' continues to flash.

ErgoOne E Multi-Channel Pipettes · User Manual · 15
®