StarLab ErgoOne E Instrucciones De Manejo página 20

20 · ErgoOne E Multi-Channel Pipettes · User Manual
®
c. Confirm DISP mode: Press 'Enter' key.
1x
The display now shows 'blo' for blow-out.

d.
Preparing for pipetting: Press the pipetting key
once to move the piston to its start position.
The arrow in the display points upwards

(aspiration).
1x
e. Set partial volume: Pressing the arrow key (+\−)
sets the volume. Pressing and holding the arrow
key causes the volume to change quickly.
'VOL' flashes.

1x
f.
Confirm partial volume: Press 'Enter' key. The
display shows the newly set partial volume.
'Steps' flashes. The maximum possible number of

steps is displayed.
g. Set the number of steps: Pressing the arrow key
(+/-) sets the number of steps.
'Steps' continues to flash.

h. Confirm number of steps: Press 'Enter' key.
The display shows the set number of steps.

i. Aspirate liquid: Press the pipetting key once
to aspirate the liquid.
1x
j.
Dispense liquid: Each time the pipetting key is
pressed, a dispensing step is performed. The
arrow in the display points downwards
(dispensing). The 'Step' display shows the
1x
number of steps remaining.