peerless-AV PLA60-UNL Instalación Y Ensamblaje página 12

Mounting and Removing Flat Panel Display
• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.
Refer to mount instruction sheet for attachment of adapter bracket to mount.
Hook adapter brackets (BB) onto adapter bracket (AA), then slowly swing display in as shown. Turn screws
8
clockwise at least six times to prevent display from being removed as shown in detail 4. Tighten using allen
wrench (CC).
Display can be adjusted horizontally if desired.
Note: To lock the display down, tighten screws to adapter bracket as shown in detail 4.
To remove display from mount, loosen screws, swing display away from mount, and lift display off of mount.
SAFETY/SECURITY
SCREWS
WARNING
AA
BB
DETAIL 4
12 of 40
BB
AA
ISSUED: 2006-05-06 SHEET #: 202-9141-14 (2023-01-31)