Blackmagic Design 2110 IP Converter 3x3G Manual De Instalación Y Funcionamiento página 11

Turn the menu dial to navigate between the menu options and press 'set' to select a submenu.
1 MENU
2 SET
3 LOCK
Turn the menu dial to move through the menu settings
Using the menu dial, select the submenu option and press 'set' to confirm.
Press 'menu' to step back through the options and return to the home screen.
Settings
Outputs Menu
Use the output menu to route incoming ST 2110 sources to the SDI outputs on the rear of the
Blackmagic 2110 IP Converter 3x3G.
You can also route your sources and destinations using an NMOS controller. This will provide
flexibility to subscribe to the video, audio or ancillary essences.
To route an ST 2110 stream to the SDI output on your Blackmagic 2110 IP Converter 3x3G:
1 With the 'outputs' menu selected press the 'set' button.
2 Use the menu dial to select which SDI output you want to use and press the 'set' button.
1 1 MENU
2 SET
3 LOCK
Settings 11