Blackmagic Design 2110 IP Converter 3x3G Manual De Instalación Y Funcionamiento página 16

5 Ref Out
Your Blackmagic 2110 IP Converter 3x3G features a stabilized video reference output
corresponding to standard definition black burst and high definition tri-sync standards. For
more information on selecting your reference output, refer to the 'settings' section earlier in
this manual.
6 SDI In
3G-SDI video input BNC connectors.
Blackmagic Converters Setup
Blackmagic Converters Setup is a software utility used to change settings and update the
internal software in your IP converter.
First, download and install the latest Blackmagic Converters software from the Blackmagic Design
support center at www.blackmagicdesign.com/support
To use Blackmagic Converters Setup:
1 Connect your Blackmagic converter to your computer via USB.
2 Launch Converters Setup. Your converter model will be named in the utility home page.
3 Click on the circular 'setup' icon or the image of your Blackmagic 2110 IP Converter 3x3G to
open the settings.
Inputs
Use the inputs tab to label the connected SDI inputs. The NMOS protocol broadcasts these
labels to make identifying them via an NMOS controller or other Blackmagic 2110 IP Converter
3x3G easy.
Blackmagic Converters Setup 16