Blackmagic Design 2110 IP Converter 3x3G Manual De Instalación Y Funcionamiento página 9

Using The Front Panel
When using Blackmagic 2110 IP Converter 3x3G any information you need to know is displayed
on the unit itself via the LCD home screen and the buttons and menu dial let you quickly
change settings. This section of the manual describes each feature on the front panel and what
it is used for.
1
1 USB-C
USB-C port for updates and configuring via Blackmagic Converters Setup utility.
2 Input and Output Buttons
The numbered buttons on the front panel let you select quickly between inputs and
outputs. To switch between input and output mode, double press any of the numbered
buttons. To see which mode you are in, check the icon on the home screen. The button will
illuminate when selected.
3 Menu Buttons
Use the menu and set buttons along with the menu dial to configure settings. The buttons
can also be locked by holding down the lock button until the button label illuminates red. To
unlock the buttons simply hold the lock button down again. More information on using the
LCD menu follows.
4 LCD
The LCD shows the home preview screen with status icons and LCD menu.
Home Screen
Icons displayed above the video preview indicate the current status of the Blackmagic 2110 IP
Converter 3x3G. Below is a description of the information displayed.
2
1 MENU
2 SET
3 LOCK
3
4
Using The Front Panel 9