Publicidad
Idiomas disponibles
Idiomas disponibles
EN
NL
4. Fold the wheelchair (see §2.5) and lift the wheelchair in the car (if necessary, with the help of
2 persons) by grasping the fixed parts of the frame.
5. Attach the solid parts of the frame securely to the vehicle.
6. Place the wheelchair in drive mode (engaging the parking brakes) and check that the operating
console is switched off.
2.5
Folding/Unfolding
CAUTION
Make sure that your fingers, clothes, buckles won't get trapped during (un)folding.
To unfold the powered wheelchair:
1.
Switch OFF the wheelchair.
2.
Place the wheelchair upright on the support wheels (1).
3.
Pull the seat and backrest apart to unfold the frame until the bracket (2) clicks into place.
Make sure that the locking bracket is in locked position.
4.
Place the wheelchair on the rear and front wheels.
5.
Fold the armrests (3) down until they click into place.
6.
Fold the footrest (4) down.
7.
Mount any options that had been removed for transport.
8.
The wheelchair is now ready for use.
To fold the powered wheelchair:
1.
Switch OFF the wheelchair.
2.
Remove any loose options.
3.
Make sure that the wheelchair is in freewheel position (see §3.4).
4.
Press the buttons (5) on the armrests and fold the armrests (3) backwards.
5.
Unlock the frame by pressing the bracket (2).
6.
Grasp the backrest and seat frame and press them toward each other. Make sure that the
wheelchair is standing stable upright on the support wheels (1).
7.
Fold the footrest (4) over the battery.
8.
In case the armrests are sticking out, adjust the armrests to a more compact position close
to the frame.
Risk of injuries
6
Plego
2023-09
Before use
Publicidad
