Domo DO541FR Manual De Instrucciones página 41

4. Plug the power cord into a socket. A beep indicates that the device is in standby mode.
5. Remove the frying pan from the device. Place the ingredients in the frying pan with the grille. Do
not put too many ingredients in the appliance so that the ingredients do not touch the heating
elements. Pay attention to the MAX indication in the frying pan here.
6. Put the frying pan with the filled grille back in the device.
7. Press the on/off button to make the desired settings.
8. Press the temperature/timer setting to set the desired temperature and timer. You will see the
display alternate between '180°C' and '15 min'. You can now set the temperature and time using the
relevant increase/decrease buttons. The temperature ranges from 60°C to 200°C, and the timer can
be adjusted up to 60 minutes. You can also hold down the buttons to advance the setting faster. You
can see which temperature/time is selected on the display.
9. Press the start/pause button to start. Small light stripes will flash on and off one after the other on
the display. These remain visible on the display as long as the appliance is switched on. The set timer
and temperature appear alternately on the display.
NOTE: You can pause the appliance if you want to add/remove ingredients during use. Remove the
frying pan from the appliance. The display will turn off to show the appliance has been paused. If you
want the appliance to continue cooking, place the frying pan back in the device. The appliance will
automatically continue frying.
10. You can take the fryer basket out of the appliance in between to shake up the ingredients or to check
how fried your food is. The appliance stops working automatically and will continue working (if the
set time has not yet elapsed) when you slide the fryer basket back into the appliance.
11. At the end, a bell will ring to indicate that your food is ready. The unit then switches off
automatically.
12. To switch off the appliance before cooking has finished, press the on/off button for several seconds.
When you switch off the appliance early, or if the programme has ended, the display will show 'OFF'
and a continuous ringing signal will sound.
13. Remove the frying pan from the appliance and place it on a heat-resistant holder. You can put the
food in a bowl or take it out of the frying pan with heat-resistant tongs that do not scratch the non-
stick coating of the frying pan.
WARMING FUNCTION
You can also press the warming button
will ensure that, after the set time has elapsed, the appliance will keep its contents warm at 80°C for 30
minutes. A corresponding light will be on as long as the function is on.
COMMENTS
· An acoustic signal is emitted for each setting you set on the device.
· You can monitor the progress of the cooking through the viewing window.
Briefly press the light on/off button to turn the inside light on. The light will stay on until you switch it
off or until the appliance enters standby.
· Excess oil is collected in the frying pan.
· If your food is not ready after the set time has elapsed, you can always switch the appliance back on
for a few minutes.
· After the appliance has been switched off, it will continue to run for a while to cool down. Then a beep
sounds to indicate that the appliance is now completely off.
· There is no need to preheat the appliance. You can add three minutes to the desired baking time if
necessary for frozen products.
www.domo-elektro.be
before or during frying to turn this function on. This function
41
DO541FR