Forno Alta Qualita FFSGS6156-30 Guia De Instalacion página 13

YOU NEED TOOLS FOR INSTALLATION. (not supplied with the range)
Screwdriver
Protective
gloves
Door handle installations
The door handle is not pre-installed. Follow the illustrations
below to install the door handle quickly and easily.
1. Remove the black rubber cap on the inside of oven door. (Do not throw it away).
2. Insert the screwdriver to the hole to reach the embedded screw.
3. Position the handle holder correctly to accept the screw bolt on the outside of oven door, tighten the
screw.
4. Repeat step No. 1 to 3 for the other side.
5. Put the black rubber caps back to cover the two holes on the inside of oven door.
Cooktop Burner Grills Installation
Remove the packing materials from the cooktop burner grills.
Place the burner grills to the correct position. Check the
direction of middle grill on the right as illustrated, the thicker
side should be towards the left.
Put the cook plate (for FFSGS6156-48 and FFSGS6156-60)
and the wok support to the burner(s) you like to cook.
Regulator (pre-installed)
Serial Number Sticker & Instruction Manual
Cord plug (pre-installed)
Wrench Socket wrench
Adjustable
Hammer
wrench
Allen key
Adjustable
pliers
13
1 piece
1 set
1 piece
Tape measure
&Pencil
Drill
48"
60"
60"