Publicidad
Idiomas disponibles
Idiomas disponibles
No.
Function
Busy cannel
1
lockout
Offset
2
direction
3
CTCSS/DCS
Add/delete
4
scan list
General
5
settings
Note:
- Channel function menu is used to edit the setting for current channel.
10.- GENERAL SETTINGS MENU:
1. Press and hold [PUSH] knob for 2 seconds to enter menu list.
2. Turn [CH] knob to find menu 1-6.
3. Press [PUSH] knob to choose the menu.
4. Turn [CH] knob to choose wanted value.
5. Press [PUSH] knob to return to previous menu, press any other key or wait 5
seconds, the setting will be stored and exit.
No.
Function
1
Hi-cut
2
NB/ANL
3
ECHO
4
+10 kHz
5
ROGER
LCD display
LCD display
OFF: Disable function.
ON: Enable function.
Default: OFF.
OFF: Disable function.
ON: Enable function.
Default: ON.
OFF: Disable function.
ON: Enable function.
Default: OFF.
OFF: Disable +10 kHz function.
ON: Enable +10 kHz function.
Default: OFF.
OFF-5, Total 6 groups.
Default: OFF, disable function.
English - 15 -
Descriptions
OFF: Disable function.
ON: Enable function.
Default: OFF.
REP+: TX frequency > RX frequency.
REP-: RX frequency > TX frequency.
OFF: Disable function.
Default: OFF.
CTCSS: 67.0 ~ 250.3 Hz, total 38
groups.
DCS: D023N ~ D754N, total 104
groups.
OFF: Disable function.
Note: This function is available only
when install the optional CTC board.
ADD: LCD display "SC" icon, present
cannel is added to scan list.
DEL: LCD does not display "SC" icon,
preset cannel is not added to scan list.
Default: OFF.
You can select ON/OFF. When select
OFF will display the no. 6 to no. 11.
Descriptions
Publicidad
