Publicidad
Idiomas disponibles
Idiomas disponibles
DTMF
6
PTT ID
Note:
- General settings menu offer one-time setting for all channels.
11.- SETTINGS PARAMETERS MENU:
1. Hold [MENU] key for 2 seconds to enter menu list.
2. Turn [CH] knob to find menu No.1 to No.15.
3. Press [PUSH] knob to choose the menu.
4. Turn [CH] knob to choose wanted value.
5. Press [PUSH] knob to return to previous menu, press any other key or wait 5
seconds, the setting will be stored and exit.
No.
Function
1
BEEP
LCD
2
display in
TX mode.
3
Mic gain
Monitor
4
gain
5
TOT
SWR
6
protection
Voltage
7
protection
Scan
8
type
9
Clarifier
BOT: Press PTT to send DTMF encode.
EOT: Release PTT to send DTMF encode.
CALL: Hold [PTT] + [EMG] to send DTMF
encode.
Note: If the M1-M16 storage has no PTT
ID, DTMF function is defaulted OFF. Users
able to choose the DTMF group only when
programmed with code.
LCD display
OFF: Disable function.
ON: Enable function.
Default: OFF.
OFF:
transmitting.
SWR:
transmitting.
TOT: Displays TOT remain time when
transmitting.
DC: Displays voltage when transmitting.
Default: OFF.
1-36, total 36 levels available.
Default: OFF.
1-32, OFF, total 33 levels available.
Default: OFF.
1-600 seconds, OFF, total 10 minutes
available.
Default: 180 seconds.
OFF: Disable function.
ON: Enable function.
Default: ON.
OFF: Disable function.
ON: Enable function.
Default: ON.
SQ: SQ scan function.
TI: Time scan function.
Default: SQ.
OFF: Disable function.
R: Open RX frequency adjustment.
English - 16 -
Description
Displays
TX
frequency
Displays
SWR
when
value
when
Publicidad
