Publicidad
Idiomas disponibles
Idiomas disponibles
C
Problem
Heavy build up of frost on
the door seal.
Unusual noises
Water on the floor
Side panels are hot.
If the malfunction shows again, contact the Service Center.
These data are necessary to help you quickly and correctly. Write the necessary data here, refer
to the rating plate.
Useful information
Possible cause
Door seal is not air tight.
Appliance is not level.
The appliance is touching the wall
or other objects.
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or the
wall.
Water drain hole is blocked.
It's normal. Heat exchange parts
are in the sides.
22
Carefully warm the leaking sections
of the door seal with a hair dryer
(on a cool setting). At the same time
shape the warmed door seal by hand
such that it sits correctly.
Re-adjust the feet.
Move the appliance slightly.
If necessary, carefully bend the
component out of the way.
See the Cleaning and Care section.
Take gloves to touch sides if needed.
EN
Solution
Publicidad
