Craftsman 917.28701 Manual Del Propietário página 17

MAINTENANCE
BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE
SCHEDULE
EACH 8 25 50 100 SEASON STORAGE
USE HOURS HOURS HOURS HOURS
Check Brake Operation _
T Check Tire Pressure
=J
R
CheckOperatorPresence & ROSSystem=
V
A
Check for Loose Fasteners _ V _ V"
C Check/Replace Mower Blades Vf3
T
Lubrication Chart _ if
0 Check Battery Level
R
Clean Battery and Terminals I_
Check Transaxle Cooling V'
Check Mower Levelness If
Check V-Belts V _
Check Engine Oil Level V _ I_
Change Engine Oil/with oil filter Ik_'l,2 V"
Change Engine Oil/without oil
filter Vrl,2
E Clean Air Filter _i
G Clean Air Screen
I Inspect Muffler/Spark Arrester if
N Replace Oil Filter (If equipped) Ik_ 2
E
Clean Engine Cooling Fins If 2
Replace Spark Plug if if
Replace Air Filter Paper
Cartridge
_2
Replace Fuel Filter
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-tree battery.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
'_) Spindlers r_ ,_2) S pindle
Zerk S,-_'I _ Zerk
I i I ii i
@Front Wheel,_,t/ -'_ @Front Wheel
Bearing _ Bearing Zerk
Zerk //!,,:_) / ! _
, ,---= ........ ,
11 __Q)Gearshift
0_< ', Pivots
d_SAE 30 or 10w30 Motor Oil
,_General Purpose Grease
_)Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly.
17