cecotec BOLERO WASH&DRY 10680 INVERTER B Manual De Instrucciones página 124

ENGLISH
Service of Cecotec.
- Keep all packaging materials away from children.
- Before using the washing machine, the product shall be calibrated.
- Before washing the clothes for the first time, the product shall be operated in one
round of the whole procedures without the clothes inside.
- Make sure that all pockets are empty. Sharp and rigid items such as coins, brooches,
nails, screws or stones may cause serious damage to this machine.
3. PRODUCT INSTALLATION
1. Place the device on a flat, stable and dry surface. Make sure the product does not
stand on the power cord.
2. Never install it on a soft carpet or wooden floor, or on any kind of mezzanine.
3. The washer dryer may move a little during operation due to overload factors.
4. Avoid direct sunlight and ensure sufficient ventilation.
5. Keep the room environment dry and avoid humidity.
6. Remove the cardboard box and Styrofoam packing.
7. Free the power cable and the drain hose from the rear.
8. Remove any accessories that may be inside the drum, such as the water supply hose,
instruction manual, etc.
9. The washer dryer should be operated within a temperature range of 5-40°C. If used
under 0°C, the inlet valve and draining system may be damaged.
10. Install the appliance ensuring sufficient space around it (Fig. 4):
a: minimum 3 cm.
b: minimum 5 cm.
c: minimum 5 cm on the left side.
d: minimum 5 cm on the right side.
e: minimum 70 cm.
WARNING: Do not allow metal parts of the appliance to come into contact with metal sinks
or other appliances.
124 BOLERO WASH&DRY 10680 INVERTER B / STEEL B