ENGLISH
WASH CYCLES
M-Smart washing cycle
The M-SMART wash cycle can intelligently detect the weight of the laundry and combine
different wash times and temperatures for a smart wash.
It is shown on the display in the detection stage after the cycle starts, and the
M-SMART wash cycle can be activated by the following 3 methods:
4.
When the device is OFF, press and hold the ONE-TOUCH button for at least 3 seconds,
the device will run the M-SMART cycle directly with the M-Smart indicator light
illuminated.
5.
When the device is ON, press and hold the ONE-TOUCH button for at least 3 seconds,
the device will run the M-SMART cycle directly with the M-Smart indicator light
illuminated.
6.
When the appliance is on, press the ONE-TOUCH button lightly, the M-Smart indicator
light will turn on, then press the "START/PAUSE" button, the appliance will run the
M-Smart wash cycle.
Drying programme
How to set the drying programme?
4. To set the "Washing'Drying" programme (Washing + Drying).
Only some of the washing programmes can add the drying function.
First, load the laundry into the drum, close the door, turn the wash cycle selector to select
the desired wash programme (except the drying programme) and press the Drying button
to select the two drying modes as follows:
-
Auto Drying: press the Drying button continuously to adjust the drying time shown on
the display, and when "
drying time can be
humidity of the laundry.
-
Timed drying: press the Drying button to set the drying time. Press the drying button,
the digital display will show the drying time (30-60-90-120-150-180-210-240
minutes). Select a suitable drying time and activate the "Timed drying" mode. Then,
press the button. "START/PAUSE", the machine will start to run the "Wash + Dry"
Programme, with the drying programme automatically activated at the end of the
washing programme.
5. To set the "Drying only" programme WITHOUT PREWASHING
140
BOLERO WASH&DRY 10680 INVERTER B / STEEL B
" is displayed, the "Auto Drying" mode is activated, the
adjusted automatically according to the amount and