cecotec BOLERO WASH&DRY 10680 INVERTER B Manual De Instrucciones página 156

ENGLISH
U4
H
156 BOLERO WASH&DRY 10680 INVERTER B / STEEL B
Door lock fault
Drum temperature is high
The door is not closed
properly and the door lock
does not function normally.
Close the door again, turn the
wash cycle selector to the
"OFF" position to turn off the
power supply, and then turn
the selector to select any
wash programme and press
the START/PAUSE button
to restart the programme.
Eliminate the causes of this
failure. If the fault code still
exists, please contact the
Cecotec Technical Support.
If the fault code appears and
you cannot open the door,
the door lock may be faulty,
please contact Cecotec
Technical Support.
Press the START/PAUSE
button to suspend operation
of the appliance and wait
a few minutes. When the
temperature in the drum
drops to a safe range
and the fault code on the
display is cleared, press
the START/PAUSE button to
continue with the rest of the
programme. If the fault code
still exists, please contact the
Cecotec Technical Support.