cecotec BOLERO WASH&DRY 10680 INVERTER B Manual De Instrucciones página 143

- Turn the wash cycle selector to reset the wash cycle. The "Delayed Completion"
indicator light will go out.
NOTE:
- The "delayed end" function cannot be set in some wash cycles.
- The actual end time of the wash cycle may be different from the set delayed end
time, depending on multiple factors such as water supply pressure, drainage, type of
laundry, water temperature, as well as other conditions.
Child Lock
1. The setting of the child lock function can prevent malfunctions or unwanted incidents.
2. During operation, press and hold the "SPEED" button for approximately 3 seconds to
set or cancel the child lock function.
3. After setting the child lock function, its indicator light comes on, the door cannot be
opened and the control panel is locked, the buttons remain inactive, as well as the
wash cycle selector (the indicator light below the power symbol is on
machine can only be switched off by turning the wash cycle selector to its OFF
position, the indicator light below the power symbol will go out and the device will stop
operating. If the machine is switched off, the child lock function will be cancelled.
4. When the machine is switched on again, it will directly run the selected programme
before it was switched off.
Stain removal
This option allows you to select the type of stains on the laundry for better efficiency
during washing.
The appliance adjusts the average wash temperature, drum movement and soaking time
to the specific type of stain. Hot or cold water, gentle or intensive washing and long or
short soaking ensure that the washing sequences are specially adapted to each type of
stain. Selecting this option ensures that the stains are treated in the best possible way.
NOTICE: Pressing and holding the "STAINS" button automatically runs through the set type
of stains.
The duration of the wash cycle varies according to the type of soiling selected.
Before the first wash
All washer dryers are tested before leaving the factory under strict quality control. This
process involves running several wash cycles. As a result, a small amount of water may
BOLERO WASH&DRY 10680 INVERTER B / STEEL B
ENGLISH
). The
143