Publicidad
Idiomas disponibles
Idiomas disponibles
cegard/Smart
6.11 Output
All data of the cegard/Smart light curtain edges (including
the status of the protective field) are transmitted via RS485
interface to the cegard/Smart control unit.
6.12 Power-up
Please refer to Chapter 5.9
6.13 Indicator LED status description
(see Chapter 7.2)
- Emitter edge (Tx)
• Power (Indicator LED 1)
Red LED
Sensor status
Power ok
˜
No power or edge is defective
™
(see Chapter 6.14)
Receiver edge (Rx)
•
Power (Indicator LED 1)
Red LED
Sensor status
Power ok
˜
™
No power or edge is defective
(see Chapter 6.14)
•
Output Status (Indicator LED 2)
Red LED
Sensor status
˜
Detection field interrupted / object
detected
Detection field free / no object detected
™
˜ = LED on
™ = LED off
© CEDES | V 1.0
English
17
Publicidad
