Wild Country ROPEMAN 4 Manual Del Usuario página 8

: confirms adherence to the Regulation 2016/425 on personal protective equipment as
brought into UK law and amended
8503: Approved body performing the UK type examination (Module B)/ Approved body
controlling the manufacturing (Module C2):
CertDolomiti LTD
17 Grosvenor Street, Mayfair,
London – W1K 4QG
United Kingdom
xxA mmyy: Information on traceability
xx: Index (Reference to current drawing)
A: Production batch (A = first batch of the production month)
mm: Month of manufacture (01 = January)
yy: Year of manufacture (13 = 2013)
PUSH: indicates the direction of thrust for clamping the rope on the cylinder.
TROPHYLINE: Brand of a specific Wild Country's Client
: Pictogram indicating that the directions must be read.
WILD COUNTRY - Oberalp S.P.A., - Via Waltraud Gebert Deeg Strasse 4, I-39100 Bozen - Italy:
Brand, name and address of manufacturer
Importer:
Oberalp UK LTD
Unit F1 – Intec - Parc Menai,
Bangor - Wales LL57 4FG
United Kingdom
G GUARANTEE
Wild Country - Oberalp S.P.A. guarantees all of its products from new against defects in
workmanship or materials, unless the product has been worn out, misused or abused
as determined by our examination. This guarantee is in addition to your statutory rights
which remain unaffected. Wild Country - Oberalp S.P.A. reserves the right to modify
without notice the design and specifications of products described in these instructions.
All weights, dimensions and sizing specifications where quoted are nominal.
H PERIODIC INSPECTION
The safety of users depends on the efficiency, integrity and durability of the equipment.
Regular inspection of the device is necessary at least once every 12 months by the manu-
facturer, by a competent person authorized by the manufacturer or by a competent person
according to the current national regulations on PPE inspection. The carrying out of the
periodic inspections does not exempt the user from the obligation to carry out the checks
before, during and after each use, nor to request an extraordinary periodic inspection at the
occurrence of exceptional events or in case of doubts on the proper functioning of the device.
The frequency of inspections must increase if the device is used by multiple individuals,
intensity of use or if subject to particular harsh wear. The data of the device and the results
of the inspections must be reported respectively in the device identification sheet and in the
device periodic inspection sheet. The instruction for use and any additional documents must
be kept for the entire life of the device. In absence of the document showing the data of the
device and the results of checks, or if illegible, refrain from using the device.
Do not remove labels or marking and check that these are all legible even after use.
WARNING: Strictly check the product before, during and after use to ensure that it is in an
efficient condition and working properly before using it.
Verify there is no presence of cracks, cuts, incisions, deformations, sharp edges, abnormal
variations in the color, corrosion and oxidation in any component;
Verify that the cam (D) doesn't show signs of wear;
Verify that the mobile side plate (B) rotates smoothly and locks properly;
Verify that the cam (D) clamps properly and, once released, slowly automatically return to
its position;
Verify that the pin (G) is aligned;
Verify there is no dirty in the gap, especially between the cam (D) and the two side plates
(A and B).
In case of one of the defects listed above are present, the product should be withdrawn
from service immediately. If the device has been subjected to a major fall or load, the pro-
duct should be withdrawn from service.
I DEVICE IDENTIFICATION SHEET
1.Trademark of Manufacturer/2.Manufacturer's address/3.Product/4.Model/5.Batch code/6.
Month and Year of manufacture/7.Purchase date/8.Date of first use/9.User/10.User referen-
ce (address, telephone number, ...)/11.Notes(e.g. frequency of use, maintenance, etc...)
J DEVICE PERIODIC INSPECTION SHEET
Inspection number/Inspection date/Name and signature of the responsible of inspection/
Comments/Result of inspection (OK/NOT OK)/Date of next inspection