SKYLOTEC RESC B Instrucciones De Uso página 8

adjustments and provides an appropriate level of comfort for the
application.
2.) Designation of the parts
a. Shoulder straps
b. Adjustment buckles for the shoulder straps
c. upper loops (on the chest strap)
d. Chest strap
e. Seat area
f. lower loops (leg area)
g. Leg loops
h. Back strap
i. D-ring
j. Belt slider
3) Product labelling
1. manufacturer
2. address of the manufacturer
3. article number
4. article designation
5. relevant standards + year of issue
6. serial number
7. month and year of manufacture
8. CE marking + supervising body
9. observe instructions
10. QR code
11. note on the max. nominal load incl. equipment
4.) How to put on the Resc B with shoulder straps
• Put on the shoulder straps like a jacket. (4.1)
• Pass lower loops through legs. (4.1)
• Connect the 3 loops of one colour with the carabiner of the
rescue lifting device/ descender device. (4.2)
5.) How to put on the Resc B without shoulder straps
• Put the rescue loop around the body. (5.1)
• Pass lower loops through legs. (5.1)
• Connect the 3 loops of one colour with the carabiner of the
rescue lifting device/ descender device. (5.2)
6.) How to put on the Resc B Harness
• Get into the leg loops and put on the RESC B HARNESS like
trousers.(6.1)
• The back strap must be above the hips. (6.2)
• Slide down the belt slider from the D-ring to fix the harness. (6.2)
• Attach the D-ring to the rescue lifting device/ descender
device.
7.) Application of the coloured loops on the RESC B
The different colours of the loops allow optimal adaptation to
different body sizes (yellow and blue loops for adults, red loops for
children).
8 8
MAT-BA-0020-01.indd 8 MAT-BA-0020-01.indd 8 20.04.2023 12:01:11 20.04.2023 12:01:11