Kapro Prolaser 3D All Lines Green 8832G Manual Del Usuario página 10

Working in Automatic mode (self-leveling):
In Automatic mode the laser level will level itself within a ±3° range.
1. Remove the laser level from the case and place it on a solid,
flat, vibration free surface or on a tripod.
2. Push the POWER switch to ON mode. The bottom horizontal
beam and its LED indicator will turn on.
3. Choose the required beams by using the selector buttons:
a. Horizontal beam selector (a) operates in the following cycle:
Bottom beam (default) → No beams.
b. Vertical beam selector (b) operates in the following cycle:
Side beam (default) → Front beam → Both beams → No
beams.
4. If the initial inclination of the laser level is beyond ±3°, the laser
will alert by flashing and beeping. In this case reposition the
laser level on a more suitable surface.
10
OPERATING INSTRUCTIONS